ПО для спутникового ресивера Strong SRT 7004 HD

Модераторы: Administrator, KOSTEY, boom, suen, Модераторы, Официальный представитель

  • Сообщения
     
Аватара пользователя
boom
Сообщения: 8857
Зарегистрирован: 07 мар 2012 16:14
Пол: Мужской
Страна:: Украина
Имя: Сергей
Благодарил (а): 33 раза
Поблагодарили: 35 раз

ПО для спутникового ресивера Strong SRT 7004 HD

Сообщение boom »

SRT 7004 HD

Изображение
Изображение
Изображение

Отличное качество в HD
Смотреть телевизор с SRT 7004 – это удовольствие и еще больше развлечений. Через интерфейс Ethernet, SRT 7004 может быть подключен к интернету для просмотра новостей (RSS) и других сервисов, например, прогноз погоды. Благодаря простому управлению, разнообразным функциям и свойствам, SRT 7004 – это надежное устройство для различных домашних HD-развлечений.

Обзор продукции

Цифровой HD приемник для открытых телеканалов
RSS-лента и прогноз погоды через Интернет-портал
Воспроизведение мультимедиа через USB
Обновление ПО через внешний USB-носитель
Память на 4000 каналов
Электронный программный гид (Телегид)
Отображение номера канала или времени на дисплее
8 Списки избранных теле- и радиоканалов
Функция родительская блокировка
Телетекст, DVB-субтитры и аудиосопровождение

Цифровой спутниковый HD приемник для открытых теле- и радиопрограмм в формате (1)
RSS-лента и прогноз погоды через интернет-портал
USB-порт для воспроизведения мультимедиа файлов и обновления программного обеспечения
Отражение номера канала или времени на дисплее
Объем памяти на 4000 каналов для 64 спутников
Отличное качество звука и изображения
Телегид (EPG) для отображения на экране информации о текущей/следующей передаче и программы передач на следующие 7 дней
30 таймеры
Обновление программного обеспечения с внешнего USB-носителя
Быстрая и простая загрузка/скачивание на/с USB флэш-накопителя
Поддержка телетекста, многоязычных субтитров и аудиосопровождения (2)
Выбор языка аудио и субтитров
8списки избранных теле- и радиоканалов
Родительская блокировка для ограничения доступа к определенным каналам с помощью пароля
Разнообразные опции управления каналами: поиск, редактирование, перемещение, выбор и блокировка каналов
Включение на последнем просмотренном канале
Цифровой звук посредством коаксиального выхода (S/PDIF) для подключения к цифровому усилителю
Опции автоматического и ручного поиска каналов
Энергосбережение: автоматическая функция перехода в спящий режим
Поддержка MPEG-2, MPEG-4 и H.264
Поддерживает DiSEqC 1.0, 1.1, 1.2, GOTO X and SatCR

ПРИЕМ
Прием DVB-S2
Открытые каналы available
SD, HD available
Подлючение к Интернету RSS-лента
ПАРАМЕТРЫ
Объем памяти каналов 4000
Списки избранных каналов 8
Предустановленные каналы available
Дисплей available
Телегид (EPG) available
Резервирование программы из Телегида available
Таймеры 30
Обновление ПО USB
Телетекст available
Многоязычные субтитры и аудиосопровождение available
Многоязычный интерфейс пользователя available
Родительская блокировка available
Функции редактирования available
Опции ручного, сетевого и автопоиска каналов available
Функция перехода в спящий режим available
USB
USB мультимедиа available
ВИДЕО
Формат изображения 4:3, 16:9, Pan & Scan, Pillarbox, Letterbox, Авто
Разрешение видео PAL 50Гц: 576i, 720p, 1080i, 1080p
АУДИО
Режим аудио моно л/п, Стерео, Dolby Digital, Dolby Digital Plus*
Dolby available
ТЮНЕР
Конвертер 13/18 V DC (+/- 5%), макс. 0.5 А, с защитой К.З
Версия DiSEqC 1.0, 1.1, 1.2, GOTO X, Toneburst, SatCR
РАЗЪЕМЫ
ВХОД ТЮНЕРА available
ВЫХОД ТЮНЕРА available
HDMI available
SCART available
Цифровое видео S/PDIF available
USB available
Ethernet available
ОБЩИЕ ХАРАКТЕРИСТИКИ
Напряжение питания AC 100 - 240 B 50/60 Гц
Потребляемая мощность макс. 24 Вт, тип. 10 Вт
Потребляемая мощность в режиме ожидания 0.65 Вт
Размеры (Ш х Г х В) в мм: 220 x 170 x 45
Вес в кг: 0.68
АКСЕССУАРЫ
Батареи available
Пульт дистанционного управления available
Инструкция available
Адаптер источника питания available
EAN
Код 8717185447729
Приглашаем Вас зарегистрироваться для качественного просмотра каналов через шаринг.
Sat Biling-качественный биллинг плати только за время просмотра без абон платы!
Аватара пользователя
boom
Сообщения: 8857
Зарегистрирован: 07 мар 2012 16:14
Пол: Мужской
Страна:: Украина
Имя: Сергей
Благодарил (а): 33 раза
Поблагодарили: 35 раз

ПО для спутникового ресивера Strong SRT 7004

Сообщение boom »

Software Release SRT7004 - v 1.49 PVR - 8/26/2016

Contents
Dear customer!

Here you can download the new software for your receiver. Please uncompress the downloaded zip file and read the instructions carefully before you load the firmware into your receiver! The zip file consists of:

1) Firmware: SRT_7004_SRT_7005_v1.49_PVR_20160720.ssu

2) Release notes

3) Update Instruction:

a) At the PC:

Extract the .ssu file from the package to the root directory of the connected USB device. Then disconnect the USB device from the PC and connect it to the receiver.

b) At the Receiver:
After the USB device has been detected successfully, you can perform the software update according to the following steps:

1. Press MENU on the remote control and use up/down and <> to select System -> Update & Backup -> Image Upgrade.

2. Select the appropriate USB device (USB0 or USB1).

3. Press OK to enter the software file list and select the file containing the software image with up/down and <> then press OK to initiate the software update. An attention banner will now be displayed.

4. Press OK to start the update (or EXIT to cancel it).

Release notes
PVR SW Version 1.49 from 20.07.2016:

Following improvements were realised:

• In certain conditions, the receiver would react to any other RCU command from different brands
• Sometimes, other SatCR users on the same network, could experience “zapping” problems

Attention
NEVER disconnect the USB device from the receiver, the receiver from the main or switch OFF power during the update procedure. It can damage your receiver and warranty will void! As soon as the update has been finished, the receiver restarts automatically within the „First time installation“!

With the download of this software you confirm, that any risk of usage shall not be passed to STRONG!
SRT_7004_v1.49_PVR_20160720_EN.zip
Приглашаем Вас зарегистрироваться для качественного просмотра каналов через шаринг.
Sat Biling-качественный биллинг плати только за время просмотра без абон платы!
Аватара пользователя
boom
Сообщения: 8857
Зарегистрирован: 07 мар 2012 16:14
Пол: Мужской
Страна:: Украина
Имя: Сергей
Благодарил (а): 33 раза
Поблагодарили: 35 раз

ПО для спутникового ресивера Strong SRT 7004

Сообщение boom »

Software Release SRT7004 - v 1.42 No PVR - 1/7/2016

Contents
Dear customer!

Here you can download the new software for your receiver. Please uncompress the downloaded zip file and read the instructions carefully before you load the firmware into your receiver! The zip file consists of:

1) Firmware: SRT7004_V1.4.2_NoPVR_20151016.ssu

2) Release notes

3) Update Instruction:

a) At the PC:

Extract the .ssu file from the package to the root directory of the connected USB device. Then disconnect the USB device from the PC and connect it to the receiver.

b) At the Receiver:
After the USB device has been detected successfully, you can perform the software update according to the following steps:

1. Press MENU on the remote control and use up/down and <> to select System -> Update & Backup -> Image Upgrade.

2. Select the appropriate USB device (USB0 or USB1).

3. Press OK to enter the software file list and select the file containing the software image with up/down and <> then press OK to initiate the software update. An attention banner will now be displayed.

4. Press OK to start the update (or EXIT to cancel it).
Release notes
No PVR SW Version 1.42 from 16.10.2015:

Following improvements were realised:

• Channel manager errors fixed
Attention
NEVER disconnect the USB device from the receiver, the receiver from the main or switch OFF power during the update procedure. It can damage your receiver and warranty will void! As soon as the update has been finished, the receiver restarts automatically within the „First time installation“!

With the download of this software you confirm, that any risk of usage shall not be passed to STRONG!
SRT7004_v1.42_NoPVR_20151016.zip
Приглашаем Вас зарегистрироваться для качественного просмотра каналов через шаринг.
Sat Biling-качественный биллинг плати только за время просмотра без абон платы!
Аватара пользователя
boom
Сообщения: 8857
Зарегистрирован: 07 мар 2012 16:14
Пол: Мужской
Страна:: Украина
Имя: Сергей
Благодарил (а): 33 раза
Поблагодарили: 35 раз

ПО для спутникового ресивера Strong SRT 7004

Сообщение boom »

Software Release SRT7004 - v 1.43 PVR - 1/7/2016

Contents
Dear customer!

Here you can download the new software for your receiver. Please uncompress the downloaded zip file and read the instructions carefully before you load the firmware into your receiver! The zip file consists of:

1) Firmware: SRT7004_v1.43_PVR_20151023.ssu

2) Release notes

3) Update Instruction:

a) At the PC:

Extract the .ssu file from the package to the root directory of the connected USB device. Then disconnect the USB device from the PC and connect it to the receiver.

b) At the Receiver:
After the USB device has been detected successfully, you can perform the software update according to the following steps:

1. Press MENU on the remote control and use up/down and <> to select System -> Update & Backup -> Image Upgrade.

2. Select the appropriate USB device (USB0 or USB1).

3. Press OK to enter the software file list and select the file containing the software image with up/down and <> then press OK to initiate the software update. An attention banner will now be displayed.

4. Press OK to start the update (or EXIT to cancel it).
Release notes
PVR SW Version 1.42 from 23.10.2015:

Following improvements were realised:

• Channel manager errors fixed
Attention
NEVER disconnect the USB device from the receiver, the receiver from the main or switch OFF power during the update procedure. It can damage your receiver and warranty will void! As soon as the update has been finished, the receiver restarts automatically within the „First time installation“!

With the download of this software you confirm, that any risk of usage shall not be passed to STRONG!
SRT7004_v1.43_PVR_20151023_EN.zip
Приглашаем Вас зарегистрироваться для качественного просмотра каналов через шаринг.
Sat Biling-качественный биллинг плати только за время просмотра без абон платы!
Аватара пользователя
boom
Сообщения: 8857
Зарегистрирован: 07 мар 2012 16:14
Пол: Мужской
Страна:: Украина
Имя: Сергей
Благодарил (а): 33 раза
Поблагодарили: 35 раз

ПО для спутникового ресивера Strong SRT 7004 HD

Сообщение boom »

Software Release SRT7004 - v 1.48 NoPVR - 8/26/2016

Contents
Dear customer!

Here you can download the new software for your receiver. Please uncompress the downloaded zip file and read the instructions carefully before you load the firmware into your receiver! The zip file consists of:

1) Firmware: SRT_7004_SRT_7005_v1.48_NoPVR_20160719.ssu

2) Release notes

3) Update Instruction:

a) At the PC:

Extract the .ssu file from the package to the root directory of the connected USB device. Then disconnect the USB device from the PC and connect it to the receiver.

b) At the Receiver:
After the USB device has been detected successfully, you can perform the software update according to the following steps:

1. Press MENU on the remote control and use up/down and <> to select System -> Update & Backup -> Image Upgrade.

2. Select the appropriate USB device (USB0 or USB1).

3. Press OK to enter the software file list and select the file containing the software image with up/down and <> then press OK to initiate the software update. An attention banner will now be displayed.

4. Press OK to start the update (or EXIT to cancel it).
Release notes
NoPVR SW Version 1.48 from 19.07.2016:

Following improvements were realised:

• In certain conditions, the receiver would react to any other RCU command from different brands
• Sometimes, other SatCR users at the same network, could experience “zapping” problems
Attention
NEVER disconnect the USB device from the receiver, the receiver from the main or switch OFF power during the update procedure. It can damage your receiver and warranty will void! As soon as the update has been finished, the receiver restarts automatically within the „First time installation“!

With the download of this software you confirm, that any risk of usage shall not be passed to STRONG!
SRT_7004_v1.48_NoPVR_20160719_EN.zip
Приглашаем Вас зарегистрироваться для качественного просмотра каналов через шаринг.
Sat Biling-качественный биллинг плати только за время просмотра без абон платы!
Ответить

Вернуться в «Strong HD»

Кто сейчас на конференции

Сейчас этот форум просматривают: нет зарегистрированных пользователей и 1 гость